Scooter Lifts
Because your transportation needs may not require a lowered floor van conversion, we now offer a full line of interior and exterior mounted scooter lifts. We offer a variety of scooter lifts to accommodate your needs from different manufacturers including Silver Star, Scooter Carrier, Bruno, VMI and more. Here are some of the most popular models:
The unit automatically lifts and lowers the scooter, as well as raising and lowering the hold-tite lock-down mechanism.
The Out-Sider III can raise and store 3- or 4-wheel scooters weighing up to 300 lbs., using a Class III hitch with a 2" receiver. The Out-Sider III system is fully automatic and is superior to any other rear exterior lift. The unit is powder-coated and assembled with stainless steel fasteners for long life. In addition to these features, a special weight sensing device applies exactly the right amount of pressure to the hold-tite device to secure the scooter.
Bruno's Out-Sider III features an ON-OFF key for greater security, and an automatic emergency safety latch prevents the platform from lowering unintentionally.
The Offset Space-Saver from Bruno gives you the flexibility to load a partially assembled scooter in the trunk of today's smaller cars. The unique offset design of the lift arm allows you to position your scooter inside narrow trunk openings.
The Offset Space-Saver permits lift installations for vehicles with trunks that previously were considered too small.
The Offset Space-Saver is designed with a low-profile outer arm lift assembly to make storing your scooter even easier. All controls are located conveniently on top of the lift arm.
The Offset Spacer-Saver can be stored anywhere, in the trunk or inside the vehicle.
It disassembles quickly and easily, requiring only three steps. When an additional tower base assembly is ordered, it can even be used in more than one vehicle.The Offset Space-Saver can raise and store many types of three-wheel scooters weighing up to 180 lbs, with either front or rear drive.
The Scooter-Lift Jr. lift is electrically powered from the vehicle's battery. Simply press a button on the controller and the Scooter-Lift Jr. raises and lowers your scooter, effortlessly.
Bruno's Scooter-Lift Jr. can be adapted to operate in station wagons and hatchbacks.
The Scooter-Lift Jr. gives you the convenience you need to transport your scooter, and the freedom to travel when and where you want to.
The Scooter-Lift Jr. was designed to help raise and store three-wheeled scooters in most auto trunks, station wagons or hatchbacks, as long as the opening is large enough to accept the partially disassembled scooter and compact lift.
The Scooter-Lift Jr. is also available with the added option of a spring-assist feature. This further reduces the effort needed to raise and lower the lift arm before and after use.
The Scooter-Lift II can raise and store a fully assembled scooter or wheelchair through the driver's or passenger's side sliding door of minivans, and passenger side doors of full size vans.
The Scooter-Lift II requires very little arm strength, balance or effort to use. It is so compact that even in a minivan, there is still enough room for three passengers to sit comfortably in the rear seat. With scooter removed, or when traveling without the scooter, entry and exit is easy since the door opening remains unobstructed.
Bruno's Scooter-Lift II also features an optional installation assembly that eliminates drilling any holes in the floor of the vehicle. This means easier removal when it comes time to transfer the lift in and out of a minivan.
The Scooter-Lift II can be used for either three-or four-wheel scooters and manual folding or power wheelchairs weighing up to 200 lbs. (91k). The Scooter-Lift II's hand-held controller makes this lift simple and easy to use.
The Bruno Big-Lifter is electrically powered from the vehicle's battery.
Simply press a button on the controller and the Big-Lifter™ raises and lowers your fully assembled power chair weighing up to 300 pounds, allowing you to manually swing it in or out of the vehicle. Minimum strength is required.
The Bruno Big-Lifter manual swing has a low-resistance design that is easy to swing in and out, and comes complete with a lifting device designed specifically for the power chair.
The Bruno Big-Lifter is a fully adjustable lift that can be installed in just a few hours and requires no structural modification to the vehicle.
The Bruno Big-Lifter securely stores your scooter or power chair in the rear of most vans, minivans and sport utility vehicles, positioned behind the rear seat.
Bruno's Curb-Sider can end the struggle of trying to manually lift and store a scooter in your van or minivan. The Bruno Curb-Sider was designed to fit most types of vans, minivans, sport utility vehicles, and pickups with caps. Plus, the Curb-Sider can be adapted for use with some types of power wheelchairs, increasing its versatility.
The Curb-Sider lift is electrically powered from the vehicle's battery. Simply press a button on the hand-held controller, and the Curb-Sider raises and lowers any scooter weighing up to 200 lbs., effortlessly.
Bruno's Curb-Sider provides a unique 180-degree powered rotation, which makes it possible to raise, lower, and rotate a fully assembled scooter on the curb, at the side of your vehicle, or directly behind it. The Curb-Sider's rotation feature allows it to stow scooters in vehicles with tailgates.
The lift arm can be folded vertically when not in use and installation does not require any structural modifications to your vehicle.
The Scooter-Lift Sr. is electrically powered from the vehicle's battery. Simply press a button on the controller and the Scooter-Lift Sr. raises and lowers your scooter, allowing you to manually swing it in or out of the vehicle.
The Scooter-Lift Sr. is also available as the VSL-560, featuring Bruno's exclusive Patented Adjustable Sub-Base. The Adjustable Sub-Base fits most vans, adds stability, is compact and allows for faster, simpler installation.
Bruno's Scooter-Lift Sr. can end the struggle of manually trying to lift and store a scooter in your van or minivan. The Scooter-Lift Sr. gives you the convenience you need to transport your scooter and the freedom to travel when and where you like.
The Bruno Scooter-Lift Sr. makes taking your scooter with you simple and easy. No need to remove and store the seat, and our custom manufactured C-Arm and T-Bar Docking Device allow you to raise you scooter at the touch of a button.
The Scooter-Lift Sr. is also available with the added option of a spring-assist feature. this reduces the effort needed to raise and lower the lift arm before and after use.
This simple to use product lifts and stores your unoccupied scooter or powerchair inside your minivan or full size van at the touch of a button. Simply roll your mobility device on the platform from either side, hit a button, and let the Joey lift and store your mobility device for you.
Securement belts are included for safety during transport. An optional barrier system is available for added safety and convenience.
Fully Powered - Makes lifting and storing your scooter or powerchair inside your minivan or full size van virtually effortless - one button operation.
350 lb/160 kg lifting capacity
Safe/Reliable - Lifecycle tested beyond industry standards
Includes securement straps for safety
Optional barrier system allows for the safe and convenient securement of your mobility device, even if you are unable to use retractable belts.
Bruno’s Back-Off™ backrest removal device allows someone to lift off the backrest part of the mobility device seat, allowing it to fit into shorter vehicle openings without having to remove the entire seat!
Can be powered by the vehicle's battery or the optional Bruno Pow'rPac
No structural modifications to your vehicle - can be easily removed for vehicle resale
Excel Elite G2 Outback Featuring a universal design that fits nearly every van and SUV on the market (even the Chrysler minivans), the Excel offers all the conveniences you expect from VMI, including a wireless keychain remote for easy operation.
The Excel is a fully automatic scooter-wheelchair lift designed to provide reliable operation. Featuring a universal design that fits nearly every van and SUV on the market (even the Chrysler minivans), the Excel offers all the conveniences you expect from VMI, including a wireless keychain remote for easy operation. Rear and curbside loading capabilities support your active lifestyle, and a sturdy 350lb. lifting capacity provides worry-free operation. The Excel's stylish looks and superior fit and finish complement your vehicle's interior.
The Excel offers a sturdy 350lbs of lifting power with the convenience of remote operation.
You wanted maximum convenience and simplicity, Elite G2 lift for wheelchair or scooter was engineered for it: Protecting chairs and scooters from the elements with an interior mounted design. Providing accessibility with a unique drive on / drive off platform. Offering faster loading and downloading with quick cycling efficiency. And furnishing maximum passenger seating with spacesaving configurations.
Want ultimate ease and simplicity? A handy keychain remote delivers it.
Prefer an unobstructed line of vision? Our low profile position assures it.
For those who want more than pure technology, the G2 also presents the purely aesthetic.A choice of five colors that lets you express your personal sense of style. The Elite G2, the scooter lift built around you.
A sturdy exterior scooter lift that does accommodate nearly any vehicle style.
One look at the Outback's durable anti-slip platform surface and all-steel, weather tight construction and you know it is a member of the VMI family. This tried and true lift solution offers all the convenience and quality of our Excel for those who prefer an exterior mounted scooter lift. The Outback offers the versatility of a 3 or 4-wheel scooter arrangement. Automatic dual hold-down arms and a "stabilizing pin" reduce rattles and sway to provide worry-free driving.
The Outback is just what its name implies: A sturdy exterior scooter lift. The Outback offers a variety of features to accommodate nearly any vehicle style, with a sturdy 300lb. lifting capacity.
This scooter lift works well on almost any car or minivan.
